Regulator Nut Aluminum for Parker 14R Regulators (D805)

P01531 Regulator Nut Aluminum for Parker 14R Regulators

E55030 - CSI E-STOP BUTTON (E712)

CSI E-STOP BUTTON (E712)

C55200 - CSI Inserter Carriage

CSI Inserter Carriage

P55145- CSI Inserter Carriage Cylinder (P1233)

CSI Inserter Carriage Cylinder (P1233) Each inserter carriage has 2 CSI Inserter Carriage Cylinders. If replacing both, please buy 2.

C55150 - CSI Drill Carriage - Electric

CSI Drill Carriage - Electric

H12055 - Neoprene Bumper 5/16-24Threaded Hole (H2100)

Neoprene Bumper 5/16-24Threaded Hole (H2100). Qty 1. Order 2 if replacing both sides.

D55101 - ER 11 Collet Nut - Teknomotor

ER 11 Collet Nut - Collet nut only. Does not include the collet.

P55112 - CSI Router Lift Cylinder

CSI Router Lift Cylinder (P1232)

P55102 - CSI Router Rotate Cylinder

CSI Router Rotate Cylinder (P1231)

C553103 - CSI Bird Assembly - Universal

CSI Bird Assembly - Universal

Bosch 1617 Collet Wrench Set (Black)

Bosch 1617/1617EVS Collet Wrench Set

Nycoil H6810 10-32 M x 5/32 OD PI (P205)

Nycoil H6810 10-32 M x 5/32 OD Push in fitting (P205) Note: Some older AT Tables used a fitting that was installed/removed by placing an allen wrench down the inside of the fitting(see picture below).  We no longer sell this style of fitting. ...

D35001 - Bosch 1/2" Collet Assembly

D35001 - Bosch 1/2" Collet Assembly for Bosch 1617 and 1617EVS routers.   Note: you will need a collet reducer for our 3/8" shank router bits, part number N00538 - 1/2" to 3/8" Collet Reducer

TSM-31/35 Router Spindle Top Bearing - New Bosch Style

Top spindle bearing for TSM-31 and TSM-35 router spindles with the new Bosch chuck and collet system (serial numbers 68270 and up).  -Only 1 H78088 router spindle bearing is required for the top of the spindle.   For the...

TSM-31/35 Router Spindle Assembly, New Bosch style with Bosch Wrenches

New Bosch Style TSM-31/TSM-35 Router Spindle Assembly.  This is our latest spindle with a Bosch chuck and collet.     Note: The old Porter Cable style spindle assembly is NO longer available. Machines with serial numbers...

PC 6902 1/4 Collet Assembly

PC 6902 1/4 Collet Assembly

TSM-31/35 Safety Interlock Key (E260) IDEC

TSM-35/TSM-31 Safety Interlock Key (E260) IDEC HS9Z-A52A for IDEC Interlock Switches IDEC HS5D-11ZRNM

TSM-11 / TSM-12 Clamp Foot (H1405)

TSM-11/TSM-12 Clamp Foot (H1405)

5/16-18 SE Rubber Vibration Mount (H600)

5/16-18 SE Rubber Vibration Mount (H600)

1-1/2 0-160 Bottom Mount Gauge (P610)

1-1/2 0-160 Bottom Mount Gauge (P610)

TSM-22 Work Top HDPE

Replacement TSM-22 Black Work Top HDPE

TSM-11/TSM-12 U-Bolt

TSM-11/TSM-12 U-Bolt for main router

C60274 - CSI Delivery Bowl Assembly - Service Part

CSI Delivery Bowl Assembly - Service Part

T30465 - # 30465 9/16 Wrench for Sioux 1954HPHT

# 30465 9/16 Wrench for Sioux 1954HPHT

T30466 - # 30466 11/16 Wrench for a Sioux 1954HPHT

# 30466 11/16 Wrench for a Sioux 1954HPHT

D50012 - 1/2" Collet Assy for Porter Cable #6902

1/2" collet assembly for the Porter Cable 6902 router.  Note: If using our standard 3/8" diameter router bits, you will need Part, N00538 - 1/2" to 3/8" Collet Reducer  

K48004 - AT RACE Cylinder Rebuild Kit-current version

Rebuild kit for the AT Race clamp assembly for current style of tables, Serial numbers 65314 and up. Please NOTE:  Serial numbers 64760-65273 have a taller gantry and require a similar but taller clamp.  Please call Castle at 800.282...

TSM-12 Replacement 3M grey Anti-Slip material for work deck

3M Safety-Walk Medium Resilient Tread 370, Grey for TSM-12 work deck

Castle 110 Standard 8mm Roughing Bit Helix (Up-cut)

This is the standard router bit included with the Castle 110.    This bit has a 8mm cutting diameter with a shank size of 8mm.  This Helix (Up-Cut) Roughing Cutter Bit the has been exclusively designed for use in the Castle 110 when...

C48020 - AT RACE Clamp Cylinder Assembly current style

AT Race clamp assembly for current style of tables, Serial numbers 65314 and up. Please NOTE:  Serial numbers 64760-65273 have a taller gantry and require a similar but taller clamp.  Please call Castle at 800.282.8338 for more...

E10114- Castle 110 Replacement Motor

Replacement motor for the Castle 110 pocket machine.   Note: this does not fit the Castle 100.

K11105 Castle 110 Systainer Case with Foam Insert

Castle 110 Systainer Case with custom foam inserts Note: the Castle 110 pocket machine and its accessories are NOT included.

Castle 3/32 Drill bit

Castle Drill Bit, 3/32" Size, 6" Overall Length Having issues with the material splitting while assembling your joints? Maybe your using a super dense hardwood, or a problematic composite like some plywoods, or your pocket is close to the end of the...

O15858 - TSM-31/35 Router Cylinder Bumper

O15858 - TSM-31/35 Router Cylinder Bumper Rubber bumper for the router cylinder for the Castle TSM-35 and TSM-31.  If you need to order a new router cylinder, this bumper is included with part C35021 - TSM-35 Router Drive Cylinder Assembly

Castle 110 8mm Smooth Router Bit Reverse Helix (Down-cut)

Smooth Router Bit for super clean/chip free pockets in Melamine, Plywood, Softwoods, and Hardwoods. This bit has a 8mm cutting diameter with a shank size of 8mm and a Reverse-Helix geometry (Down-Cut). The 8mm Smooth Router Bit that has been...

Castle 110 8mm Roughing Bit Reverse Helix (Down-cut)

This is a 8mm cutting diameter, shank size of 8mm, Reverse Helix (down-cut) roughing cutter for the Castle 110.  This Reverse Helix Roughing Cutter Bit the has been exclusively designed for use in the Castle 110 when cutting pockets in Softwoods,...

B04112C #7 1-1/2" Torx Coarse Pocket Screw - Case

Case of Torx drive Panhead, Coarse thread pocket screw. 1-1/2" long. For all of our Machines.  (7,000 count) Specifically engineered for use with the Castle line of Pocket Hole Machines the B04112C  # 7 1-1/2" Torx Hi-Low Pocket Screw is...

B04114C #7 1-1/4" Torx Coarse Pocket Screw - Case

Case of Torx drive Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our Machines.  (8,000 count) Specifically engineered for use with the Castle line of Pocket Hole Machines the B04114C #7 1-1/4" Torx Coarse Pocket Screw is available in...

B05112C #7 1-1/2" Square Coarse Pocket Screw - Case

Case of Square Drive Panhead, Coarse thread pocket screw. 1-1/2" long. For all of our Machines.  (7,000 count) Specifically engineered for use with the Castle line of Pocket Hole Machines the B05112C  #7 1-1/2" Square Coarse Pocket Screw is...

B05114C #7 1-1/4" Square Coarse Pocket Screw - Case

Case of Square drive Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our Machines.  (8,000 count) Specifically engineered for use with the Castle line of Pocket Hole Machines the B05114C #7 1-1/4" Square Coarse Pocket Screw is...

B04112C-0250 #7 1-1/2" Torx Coarse Pocket Screw - 250 count

Torx Panhead, Coarse thread pocket screw. 1-1/2" long. For all of our Machines. 250 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B04112C-0250 #7 1-1/2" Torx Hi-Low Pocket Screw is available in a case of 250...

B04114C-0250 #7 1-1/4" Torx Coarse Pocket Screw - 250 count

Torx Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our Machines. 250 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B04114C-0250 #7 1-1/4" Torx Coarse Pocket Screw is available in a case of 250...

B05114C-0250 #7 1-1/4" Square Coarse Pocket Screw - 250 count

Square Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our Machines. 250 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B05114C-0250 #7 1-1/4" Coarse Pocket Screw is available in a case of 250 pieces...

B05112C-1000 #7 1-1/2" Square Coarse Pocket Screw - 1000 count

  Square Drive Panhead, Coarse thread pocket screw. 1-1/2" long. For all of our Machines. 1000 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B05112C-1000  # 7 1-1/2" Square drive Coarse Pocket...

B05114C-1000 #7 1-1/4" Square Coarse Pocket Screw - 1000 count

  Square Drive Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our Machines. 1000 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B05114C-1000  # 7 1-1/4" Square drive Coarse Pocket...

B04112C-1000 #7 1-1/2" Torx Coarse Pocket Screw - 1000 count

Torx Panhead, Coarse thread pocket screw. 1-1/2" long. For all of our Machines. 1000 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B04112C-1000 #7 1-1/2" Torx Coarse Pocket Screw is available in a case of 1000...

B04114C-1000 #7 1-1/4" Torx Coarse Pocket Screw - 1000 count

Torx Panhead, Coarse thread pocket screw. 1-1/4" long. For all of our machines. 1000 count Specifically engineered for use with the Castle line of Pocket Hole Machines the B04114C-1000 #7 1-1/4" Torx Coarse Pocket Screw is available in a case of 1000...

Castle 110 Pocket Cutter

Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for installers, custom cabinetmakers, woodworkers and DIYers who want superior, “no-creep” joints. With the easy-to-use Castle 110,...

Castle 110 Pocket Cutter Professional Bundle

Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for installers, custom cabinetmakers, woodworkers and DIYers who want superior, “no-creep” joints. With the easy-to-use Castle 110,...

E35715 TSM-31/TSM-35, transformer, .50 KVA

 

P55227 - 5/32 OD x 3/32 ID Red Tube

Price per foot.

E55327 - CSI 3 HP Router Spindle

Works for 220/230V or 460/480V. Does not come pre-wired. Does not come with collet. Click here for ER20 Collet nut Click here for ER20 3/8" Collet

E55144 - CSI Drill Spindle -.44HP 220/380V

Works for 220/230V or 460/480V 3-Phase. Does not come pre-wired.  Does not include the collet. Click here for ER11 Collet nut Click here for ER11 1/4" Collet

D55025 - CSI Drill ER 11 1/4" Collet

C55410 - CSI Throat Plate (90 Degree)- Service

Service Part.   For CSI Throat Plate (45 Degree), please use C55401.

CSI Work Decks

The CSI Work Decks are replacements for the stock work deck or as extras when multiple offsets are used when using the CSI. CSI Work Decks can be swapped out in seconds and can be stored on the front of the CSI Base.  -The CSI Offset Work...

C35115 - TSM-35 Motor Pulley Assembly

Pulley assembly for the Baldor or Leeson motor on the TSM-30 series machine.

Castle Third Hand Tool

The Castle Third Hand Tool gives you that “3rd hand” while assembling your project with Castle Pockets. The Third Hand Tools work in the 90-degree position and in the flat position. No need for 2 different styles of clamps! Simply place the...

P01818 Legris 1/8 NPT X 1/8 Straight Push In

Type a description for this product here...

C11010 - Castle 110 Bit Set-Up Block

Bit Set-up Block with integrated bit height gauge for the Castle 110.

B03964 - 9/64" Premium Drill Split Point with 1/4" Shank

Manufactured using the same specifications as our standard 9/64" Split Point drill bit, this premium version is titanium nitride (TiN) coated, adding considerably to the lifespan of the bit. TiN coating is harder than carbide and provides greater...

P48003 - 1/4 F x 1/4 M Swivel Air Hose Fitting

Pneumatic swivel elbow fitting with the dimensions: 1/4" F x 1/4" M

P55085 - 1/4 NPT x 3/8 PI Straight

Pneumatic push-in strightfitting with the dimensions: 1/4" NPT x 3/8"

K11000 - Castle 110 Wrench Kit

Wrenches for tooling changes in the Castle 110.

C11060 - Castle 110 Work Stop Set

NOTE: New Castle 110 comes with work stops. Only order these if you need an additional set.  Work stops only work on Castle 110.  

Castle 110 Overlay Plate

Replacement clear acrylic overlay plate/shim designed for use with the Castle 110. Included with Castle 110 during purchase.

O55048 - CSI Screw Tube; 7-1/2"

Replacement metal tube for use in the C55848 Universal Screw Tube Plate for the CSI.  

O55050 - CSI Universal Screw Tube; 7-1/2"

Replacement metal tube for use in the C55850 Universal Screw Tube Plate for the CSI.   Limited Stock. This product will be discontinued after  stock has been depleted.   To replace this item and/or part number C55850, please see part...

C55197380 - Screw Tube Feeder Hose Only, 12mm OD x 8mm ID; 9.25'

Clear polyurethane hosing for use with the Castle Screw Delivery System. These are sold in lengths of 9.25 ft. This part does not include the metal tubes (O55050 or O55848) to connect with C55848 or C55850. To order a Screw Feeder Hose that is pre-fit...

E21617.B - Carbon Brushes for Bosch 1617 Motor (Pair)

Replacement carbon brushes for the Bosch 1617 Motor.

E21610.B - Carbon Brushes for Bosch PR20EVS Motor (Pair)

Replacement carbon brushes for the Bosch PR20EVS Motor.

B10015 - T20 Torx Driver, 1-15/16"

1-15/16" length driver for Torx screws

B00320 - T20 Torx Driver, 3-1/2" Length

3-1/2" length driver for Torx screws

C55848 - Universal II Screw Tube Plate

This Universal II Screw Tube Plate was specifically designed to work in the Castle Screw Insertion Machine and Screw Feeder System. This part does include the metal tube (O55050) for the attachment of the Screw Feeder Hose (P55197380).C55848 is a direct...

E55212 - CSI Prox Sensor Unshielded

SICK Proximity Sensor for use in the Castle Screw Insertion Machine.

C55308.1 - Router Carriage Wear Plate w/ 6 Pucks

This part has been specifically designed for use with the CSI 1.5D. This assembly includes 1 wear plate, 1 puck guard, 1 slider, 6 delrin pucks and the necessary fittings for installation.

C55308 - Router Carriage Wear Plate w/ 6 Pucks

This part has been specifically designed for use with the CSI Next. This assembly includes 1 wear plate, 1 puck guard, 1 slider, 6 delrin pucks and the necessary fittings for installation.

C60401 - Screw Tube Hose Assembly

This assembly is used to replace the Screw Feeder Hose for the Castle Screw Delivery System for the CSI. This assembly includes 9.25ft of the clear 12mm OD, 8mm ID hose with the metal tubes attached, for easy installation.

CSI Inserter Rod

Available for 1 1/4" or 1 1/2" Screw lengths.   This replacement inserter rod was specifically designed to be used with the Castle CSI Screw Insertion Machine.

C55205.RE - CSI Screw Channel Assembly 1.5 RE

The CSI Screw Channel Assembly 1.5 RE was specially designed to be used in the CSI Inserter Carriage.

N24144 - TSM-22 Main Router U-bolt

This u-bolt is designed to secure the Bosch 1617 router in the correct position in the TSM-22 motor carriage.

H24002 - TSM-22 Gas Spring

Gas spring for the TSM-22.

N24366 - TSM-22 Bar Spring

TSM-22 Single-Coil Bar Spring Specifically engineered for use with the Castle TSM-22 Pocket Hole Machines. Engineered to hold up to heavy duty use of an industrial environment. Please contact us with any questions you may have or application questions.

H25061 - TSM-21/TSM-22 Extension Spring

Extension spring for the TSM-20, TSM-21, and TSM-22.  Holds the router carriage in neutral position at rest and helps with the carriage return.

B00620 - 6" #20 Torx Driver Bit, Round

Specifically engineered for use with the Castle 100 Pocket Hole Machine. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change in order to keep production steady. The round design makes driving the...

P14018 - 1/8 NPT x 1/4 Push In Swivel Elbow

P00535 - 1/8 NPT x 5/32 PI Swivel Elbow

1/8 NPT x 5/32 PI Swivel Elbow - Legris Pneumatic fitting for Castle AT Tables, TSM-31's, TSM-35's, and CSI's. Specifically engineered for use with the Castle TSM-31 and TSM-35 line of Pocket Hole Machines the P00535 1/8 NPT x 5/32 PI Swivel Elbow is a...

P00125 - Humphrey Toggle Valve

This toggle valve is used in the AT Table Master Switch Assembly, and on all AT Race cylinder assemblies. Specifically engineered for use with the Castle line of Assembly Tables the P00125 - Humphrey Toggle Valve is an essential part to have on hand...

Castle Tight Access Driver

Castles Tight Access Driver lets you tighten your pockets and access hard to reach screws in narrow fit applications.  Engineered to hold up to heavy duty demands of an industrial environment. Keep one on hand for a quick change in order to keep...

C35022 - TSM-35 Drill Cylinder Assembly

Complete drill cylinder assembly for the Castle TSM-35 and TSM-31. Comes complete, ready to install.

P35080 - Clippard TSM-31/35 Filter/Regulator w/ Gauge

Clippard brand Filter/Regulator with gauge for use the the TSM-35 and TSM-31. Use with Clippard lubricator, Castle part P35081. For parts and accessories for the TSM-35 the TSM-31 and all of our pocket cutter machines, please check out our service parts...

P35081 - Clippard TSM-31/35 Lubricator

Clippard Lubricator for Castle TSM-35 and TSM-31.  Use with Clippard Filter/Regulator Castle part P35080. For parts and accessories for the TSM-35 the TSM-31 and all of our pocket cutter machines, please check out our service parts selection. For...

P35018 - 1/8 OD 1/16 ID Urethane tubing, Yellow

Tubing to use in the Castle TSM-35 and TSM-31. This product is sold by the foot.For parts and accessories for the TSM-35 the TSM-31 and all of our pocket cutter machines, please check out our service parts selection. For more information about the Castle...

C35021 - TSM-35 Router Drive Cylinder Assembly

Drop in replacement for the TSM-35 or TSM-31 router cylinder. Comes complete with clevis, air fittings and bumper. For parts and accessories for the TSM-35 the TSM-31 and all of our pocket cutter machines, please check out our service parts selection...

E21016 - 16 Pin Terminal Strip for EL-21 & EL-35 Control Board

Terminal strip for Castle electrical boards. For parts and accessories for the TSM-35, the TSM-31 and all of our pocket cutter machines, please check out our service parts selection. For more information about the Castle line of industrial and personal...

E94060 - TSM-35 Low Overload(208V/230V 3 phase) - Sprecher & Schuh

Castle TSM-35 Sprecher & Schuh overload for 3ph 208v /230v. For parts and accessories for the TSM-35, the TSM-31 and all of our pocket cutter machines, please check out our service parts selection. For more information about the Castle line of...

E35001 - Telemecanique Interlock Switch

TSM-35 interlock switch - used on older machines.  Please confirm interlock brand before purchase.

E03340 - TSM-31/35 Safety Interlock Switch

Safety Interlock Switch IDEC HS5D-11ZRNM can be used in place of Siemens brand switches. Please confirm interlock brand before purchase. For parts and accessories for the TSM-35, the TSM-31 and all of our pocket cutter machines, please check out our...

K21021 - TSM-21 Solenoid Upgrade Kit

Older Castle TSM-21 machines with Mead solenoids can be upgraded with this kit to a more robust and stable system.  This upgrade includes (3) 3 way solenoids, fittings, tubing, and all parts needed for upgrade. This upgrade also removes the...