E10850 - Reed Switch & Magnet, Safety, Router Stop & Drill Stop

Used on TSM-21 for Safety buttons, Router Stop and Drill Stop. Used on TSM-35 for Safety buttons. Used on Line Boring machines as Bit cover safety switch Reed Switch and Magnet, set.

P21224 - 3 Port Humphrey Solenoid for TSM-22 (See notes for TSM-21, and TSM-31/TSM-35.)

Humphrey 310, 3 Port Solenoid Specifically engineered for use with the Castle TSM-22, TSM-21 (after SN:61076), TSM-30 series(Clamp function ONLY) line of Pocket Hole Machines the P21224 3 Port Humphrey Solenoid is a spare part you need to have...

N70118-005 5 pack- Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.   This is a 5 pack.

C00200 - TSM Hold Down Foot w/ Pad

P00117 - Router Feed Rate Valve (See notes for TSM-35)

Used on TSM-20, TSM-21, TSM-22, TSM-31, and the TSM-35 as the Router Feed Rate valve. Also used on the TSM-31 and the TSM-35 as the Drill Feed rate and Drill Delay valve. One in each position. SMC Flow Control AS2000-N01

P21324 - Mead Solenoid, TSM-21 up to SN:61036 see NOTES

  Used for Clamp, Router and Drill functions on older TSM-21s. Mead 5440-0 Isonic 3 way solenoid valve. Castle suggests upgrading to our new Humphrey 3 way solenoids (instead of replacing Mead solenoids) with our upgrade kit part# K21021. ...

P00018 - 1/8” NPT Brass Muffler/Breather (P00018)

This ⅛ NPT Brass Muffler/Breather will fit the exhaust port in all TSM-21, TSM-22, TSM-35 and TSM-31 3 way and 4 way solenoids. Technical specifications: Thread: 1/8” NPT Material: brass

K21123 - TSM-21 Bosch Carriage Upgrade Assembly with Motors

 This quick-to-install upgrade will bring your TSM-21 up-to-date with available, long-lasting, reliable motors and is compatible with serial numbers 50696 to 64323. NOTE: This kit DOES NOT work with the Castle TSM-20 Pocket Cutter...

Regulator Nut Aluminum for Parker 14R Regulators (D805)

P01531 Regulator Nut Aluminum for Parker 14R Regulators

E00491 - Foot Pedal w/ 8' Cord - Line Master 491-SC36

K21021 - TSM-21 Solenoid Upgrade Kit

Older Castle TSM-21 machines with Mead solenoids can be upgraded with this kit to a more robust and stable system.  This upgrade includes (3) 3 way solenoids, fittings, tubing, and all parts needed for upgrade. This upgrade also removes the...

C00012 - Castle Door Hinge Set w/ Screws (2 Male & 2 Female)

C00015 - Castle Door Handle Assembly

E73012 - Motor Brush PC 7301 Assembly Porter Cable

E73012 Motor Brush Assembly for the Porter Cable PC 7301 Router    

P32012 - Clamp Pilot Valve

Pilot valve, used in conjuction with the Clamp solenoid to control the Clamp cylinder. Clippard, Model 2012, 3 way valve.

N70118 - Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.

P14113 - Parker Air Pressure Regulator

Air Pressure Regulator Parker 14R113FC

E75762 - 30 Amp Power Switch

Specifically engineered for use with the Castle TSM-12, TSM-21, and TSM-22 line of Pocket Hole Machines, the E75762 30 Amp Power Switch is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

E21024 - TSM-21/TSM-22 Solid State Control Board

This is latest version of the control board for the TSM-21 and the TSM-22.  Works in all TSM-21 and TSM-22.

H00141 - Bar Knob 1/4"-20

H00141 Bar Knob 1/4"-20 Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the H00141 Bar Knob 1/4"-20 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

P10320 - SQE 10-32 Clippard

Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies...

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare part you need to have. Engineered to hold up to heavy...

C21004 - Drive Cylinder Assembly w/ SQE's

N21142 - TSM-21 U-Bolt for main router

N21142 TSM-21 U-Bolt for main router (not for the drill router). Works with PC and Bosch routers, plus machines upgraded with the Bosch carriage upgrade.  Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

E82421 - PC6902 Motor Brush Porter Cable

For Porter Cable PC6902 routers

P10318 - 10-32 x 3/32 White Nylon L Barb

K21124 -TSM-21 Bosch Carriage Upgrade Assembly [Motors NOT Included]

This quick-to-install upgrade will bring your TSM-21 up-to-date with available, long-lasting, reliable motors (Not included) and is compatible with serial numbers 50696 to 64323.   NOTE: This kit DOES NOT work with the Castle TSM-20 Pocket...

N21143 - TSM-21/TSM-22 U-Bolt for Bosch drill motor

Drill motor U-bolt for the TSM-21/TSM-21 with Bosch routers.   *for machines with serial #64324 and higher

E07041 - Foot Pedals Microswitch

Replaces stock microswitch in all footpedals.  Omron Mfr #Z-15G-B7-K

1/8M x 3/32 White Nylon Barb (P115)

1/8M x 3/32 White Nylon Barb (P115)

E21016 - 16 Pin Terminal Strip for EL-21 & EL-35 Control Board

Terminal strip for Castle electrical boards. For parts and accessories for the TSM-35, the TSM-31 and all of our pocket cutter machines, please check out our service parts selection. For more information about the Castle line of industrial and personal...

E21617.B - Carbon Brushes for Bosch 1617 Motor (Pair)

Replacement carbon brushes for the Bosch 1617 Motor.

E27301 - Trimmer Motor PC# 7301 - Obsolete

The Porter Cable 7301/7310 trimmer motor has been discontinued and is no longer available. You may be able to have motors rebuilt at a DeWalt Service Center or small motor repair shop.Whats Next? The Castle TSM-21 is now built with Bosch motors...

E21617 - Router Motor Bosch #1617EVS *for machines with serial #64324 and higher

Bosch 1617EVS 2.25HP Router Motor *This service part is for machines with serial #64324 and higher.

D00710 - Tapered Black Plastic Door Hinge, Male Half

This door hinge is tapered at one end.

C00215 - Complete TSM Clamp Cylinder Assembly

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35. Clamp cylinder assembly: complete with Air inlet fitting, Clamp Foot, Foot pad, Jamb Nut and Mounting Nut.

E21610 - Trimmer Motor Bosch #PR20EVS *for machines with serial #64324 and higher

Bosch Colt 1.0HP Trimmer Router Motor *This service part is for machines with serial #64324 and higher.

P21306 - TSM-21 /TSM-22 Drive Cylinder (w/o SQE valves)

Pneumatic Drive Cylinder for TSM-21, without SQE valves Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the P21306 Drive Cylinder (w/o SQE valves) is a spare part you need to have. Engineered to hold up to heavy duty...

D21638 - Bosch 3/8" Collet Assembly

D21638 - Bosch 3/8" Collet Assembly for Bosch 1617 and 1617EVS routers.  

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35 Note: Clamp Foot sold separately

C21006 - TSM-21 Worktop Assembly For Castle Pocket Cutter Machine

This replacement worktop fits both the TSM-20 and TSM-21 pocket cutters. Castle USA is your number one source for superior quality woodworking equipment, tools and accessories. We pride ourselves on providing our customers with the absolute best and...

E11424 - 24 VAC Multi Tap Transformer

Bosch 1/4" Collet for PR20EVS

The Bosch 1/4” collet chuck is a genuine OEM replacement part for Bosch Colt router like the PR20EVS. Consult your owner’s manual for proper part number identification and proper installation steps. When you are in need of premier woodworking...

C00210 - TSM Face Plate w/ Adhesive

F14458 - 1/4-20 x 1-1/4" Socket Head Cap Screw For Pocket Cutter Machine

This set screw is used to adjust left/right carriage position on the TSM-21 and TSM-35. It is also used as the threaded mounting post for the porter cable 7301 in the TSM-21. When you are in need of premier woodworking tools and supplies, turn to Castle,...

D00720 - Tapered Black Plastic Door Hinge, Female Half

This door hinge is tapered at one end.

E21610.B - Carbon Brushes for Bosch PR20EVS Motor (Pair)

Replacement carbon brushes for the Bosch PR20EVS Motor.

H25061 - TSM-21/TSM-22 Extension Spring

Extension spring for the TSM-20, TSM-21, and TSM-22.  Holds the router carriage in neutral position at rest and helps with the carriage return.

M00235 - Foot Switch Guard - Yellow

P14018 - 1/8 NPT x 1/4 Push In Swivel Elbow

F11412 - 1-1/4-12 Jam Nut, Zinc Plated

Used to hold the clamp cylinder in place.

Obsolete-See Notes - 3/32 x 1/8 White Nylon T Barb

No longer available, please use a push-in fitting similar to this one from McMaster Carr, https://www.mcmaster.com/5779K666/   P33218 - 3/32 x 1/8 White Nylon T Barb Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in...

D50012 - 1/2" Collet Assy for Porter Cable #6902

1/2" collet assembly for the Porter Cable 6902 router.  Note: If using our standard 3/8" diameter router bits, you will need Part, N00538 - 1/2" to 3/8" Collet Reducer  

N21366 - TSM-21 Bar Spring

Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the N21366 TSM-21 SC Bar Spring is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick...

C21101 - TSM-21/TSM-22 Safety Blade Assembly

C00010 - Castle Front Door Assembly

Includes the following: CP0010 Front Door with Female Hinges  x1 D00710 Black plastic door hinge, male half (D1405) x2  G00101 Door Spring Clip Assembly x1  H00141 1/4-20 Bar Knob (H700)  x1 F14125 1/4-20 x 1/2 screw (F750) x1 F10010...

C21005 - TSM-21/TSM-22 Drive Cylinder Assembly / Parker Valve Version

Cylinder with elbow fittings and clevis bracket.  For use in TSM-21 machines serial numbers 61076 and higher.

Scratch and Dent, Castle Front Door Assembly for TSM Series

Front Door Assembly, Complete with Hinges & Door Knob Includes the following: D00710 Black plastic door hinge, male half (D1405) x2  F10010 #12X1/2 Self Tapping SMS (F1058) x4  G00101 Door Spring Clip Assembly x1 H00141 1/4-20 Bar...

1/8 M Hex Close Nipple (P323)

1/8 M Hex Close Nipple (P323)

Bosch 1617 Collet Wrench Set (Black)

Bosch 1617/1617EVS Collet Wrench Set

1/4 x 7/8 Clevis Pin (D408)

1/4 x 7/8 Clevis Pin (D408)

P18231 - 18230-1 1/8 X 1/8 WHITE NYLON BARB (P123)

P18231 - 18230-1 1/8 X 1/8 WHITE NYLON BARB (P123)