B00338 - 3/8” Solid Carbide 3-Flute Router Bit

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all materials, including composites and dense hardwoods such as hickory. The three-flute bit can be resharpened,...

B00438 - 3/8" Cobalt Steel 4-Flute Roughing Router Bit

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will want to use our Solid Carbide bit - B00338.) The rough mill design routs a consistently clean and splinter...

B00764 - 7/64” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for screw insertion—it can also be used with smaller screws. The 7/64” split point will work...

B01338 - 3/8" Solid Carbide 3-Flute Reverse Helix Router Bit

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. The groove pattern of the cutting teeth on this bit create a downward cutting motion for better finishes...

B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank

The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split Point Drill Bit will work well in all materials...

B00532 - 5/32” Premium Drill Bit Split Point With 1/4” Shank

The Castle woodworking 5/32” Drill Bit is the perfect fit when you would like a larger hole than our 9/64” bit can provide. This bit works well on all materials and is more than suitable for the majority of your pocket cutting needs. When you...

P00117 - Router Feed Rate Valve (See notes for TSM-35)

Used on TSM-20, TSM-21, TSM-22, TSM-31, and the TSM-35 as the Router Feed Rate valve. Also used on the TSM-31 and the TSM-35 as the Drill Feed rate and Drill Delay valve. One in each position. SMC Flow Control AS2000-N01

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare part you need to have. Engineered to hold up to heavy...

C55848 - Universal II Screw Tube Plate

This Universal II Screw Tube Plate was specifically designed to work in the Castle Screw Insertion Machine and Screw Feeder System. This part does include the metal tube (O55050) for the attachment of the Screw Feeder Hose (P55197380).C55848 is a direct...

CSI Inserter Rod

Available for 1 1/4" or 1 1/2" Screw lengths.   This replacement inserter rod was specifically designed to be used with the Castle CSI Screw Insertion Machine.

E55212 - CSI Prox Sensor Unshielded

SICK Proximity Sensor for use in the Castle Screw Insertion Machine.

CSI Screw Channel Cylinder (P1235)

CSI Screw Channel Cylinder (P1235)

C55308.1 - Router Carriage Wear Plate w/ 6 Pucks

This part has been specifically designed for use with the CSI 1.5D. This assembly includes 1 wear plate, 1 puck guard, 1 slider, 6 delrin pucks and the necessary fittings for installation.

C60401 - Screw Tube Hose Assembly

This assembly is used to replace the Screw Feeder Hose for the Castle Screw Delivery System for the CSI. This assembly includes 9.25ft of the clear 12mm OD, 8mm ID hose with the metal tubes attached, for easy installation.

C55205.RE - CSI Screw Channel Assembly 1.5 RE

The CSI Screw Channel Assembly 1.5 RE was specially designed to be used in the CSI Inserter Carriage.

CSI E-STOP BUTTON (E712)

CSI E-STOP BUTTON (E712)

O55050 - CSI Universal Screw Tube; 7-1/2"

Replacement metal tube for use in the C55850 Universal Screw Tube Plate for the CSI.   Limited Stock. This product will be discontinued after  stock has been depleted.   To replace this item and/or part number C55850, please see part...

C55197380 - Screw Tube Feeder Hose Only, 12mm OD x 8mm ID; 9.25'

Clear polyurethane hosing for use with the Castle Screw Delivery System. These are sold in lengths of 9.25 ft. This part does not include the metal tubes (O55050 or O55848) to connect with C55848 or C55850. To order a Screw Feeder Hose that is pre-fit...

C553103 - CSI Bird Assembly - Universal

CSI Bird Assembly - Universal

CSI Work Decks

The CSI Work Decks are replacements for the stock work deck or as extras when multiple offsets are used when using the CSI. CSI Work Decks can be swapped out in seconds and can be stored on the front of the CSI Base.  -The CSI Offset Work...

E55144 - CSI Drill Spindle -.44HP 220/380V

Works for 220/230V or 460/480V 3-Phase. Does not come pre-wired.  Does not include the collet. Click here for ER11 Collet nut Click here for ER11 1/4" Collet

O55048 - CSI Screw Tube; 7-1/2"

Replacement metal tube for use in the C55848 Universal Screw Tube Plate for the CSI.  

1.0" x .25 Extension Spring, .026 Dia (H2313)

1.0" x .25 Extension Spring, .026 Dia (H2313) CSI Stock Sense Spring

1.5" L x .250" OD, .031" Wire, Zinc Steel Ext Spring (H2303)

1.5" L x .250" OD, .031" Wire, Zinc Steel Ext Spring (H2303); CSI Pocket Detect Spring

C55200 - CSI Inserter Carriage

CSI Inserter Carriage

C55410 - CSI Throat Plate (90 Degree)- Service

Service Part.   For CSI Throat Plate (45 Degree), please use C55401.

C60274 - CSI Delivery Bowl Assembly - Service Part

CSI Delivery Bowl Assembly - Service Part

CSI Drill Carriage - Electric

CSI Drill Carriage - Electric

CSI Drill Carriage Harness

CSI Drill Carriage Harness

CSI Drill Cylinder (P1230)

CSI Drill Cylinder (P1230)

CSI ER20 Collet Nut

ER20 Collet Nut 

CSI ER20 Spindle Collet (D1200)

CSI ER20 Spindle Collet (D1200)

CSI Inserter Carriage Cylinder (P1233)

CSI Inserter Carriage Cylinder (P1233) Each inserter carriage has 2 CSI Inserter Carriage Cylinders. If replacing both, please buy 2.

CSI Inserter Carriage Harness

CSI Inserter Carriage Harness

CSI Router Carriage Harness

CSI Router Carriage Harness

CSI Router Lift Cylinder

CSI Router Lift Cylinder (P1232)

CSI Router Rotate Cylinder

CSI Router Rotate Cylinder (P1231)

D55025 - CSI Drill ER 11 1/4" Collet

E55327 - CSI 3 HP Router Spindle

Works for 220/230V or 460/480V. Does not come pre-wired. Does not come with collet. Click here for ER20 Collet nut Click here for ER20 3/8" Collet

ER 11 Collet Nut - Teknomotor

ER 11 Collet Nut - Collet nut only. Does not include the collet.

Neoprene Bumper 5/16-24Threaded Hole (H2100)

Neoprene Bumper 5/16-24Threaded Hole (H2100)