P00117 - Router Feed Rate Valve (See notes for TSM-35)

Used on TSM-20, TSM-21, TSM-22, TSM-31, and the TSM-35 as the Router Feed Rate valve. Also used on the TSM-31 and the TSM-35 as the Drill Feed rate and Drill Delay valve. One in each position. SMC Flow Control AS2000-N01

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare part you need to have. Engineered to hold up to heavy...

C55848 - Universal II Screw Tube Plate

This Universal II Screw Tube Plate was specifically designed to work in the Castle Screw Insertion Machine and Screw Feeder System. This part does include the metal tube (O55050) for the attachment of the Screw Feeder Hose (P55197380).C55848 is a direct...

CSI Inserter Rod

Available for 1 1/4" or 1 1/2" Screw lengths.   This replacement inserter rod was specifically designed to be used with the Castle CSI Screw Insertion Machine.

E55212 - CSI Prox Sensor Unshielded

SICK Proximity Sensor for use in the Castle Screw Insertion Machine.

C60401 - Screw Tube Hose Assembly

This assembly is used to replace the Screw Feeder Hose for the Castle Screw Delivery System for the CSI. This assembly includes 9.25ft of the clear 12mm OD, 8mm ID hose with the metal tubes attached, for easy installation.

C55205.RE - CSI Screw Channel Assembly 1.5 RE

The CSI Screw Channel Assembly 1.5 RE was specially designed to be used in the CSI Inserter Carriage.

O55050 - CSI Universal Screw Tube; 7-1/2"

Replacement metal tube for use in the C55850 Universal Screw Tube Plate for the CSI.   Limited Stock. This product will be discontinued after  stock has been depleted.   To replace this item and/or part number C55850, please see part...

C55197380 - Screw Tube Feeder Hose Only, 12mm OD x 8mm ID; 9.25'

Clear polyurethane hosing for use with the Castle Screw Delivery System. These are sold in lengths of 9.25 ft. This part does not include the metal tubes (O55050 or O55848) to connect with C55848 or C55850. To order a Screw Feeder Hose that is pre-fit...

CSI Work Decks

The CSI Work Decks are replacements for the stock work deck or as extras when multiple offsets are used when using the CSI. CSI Work Decks can be swapped out in seconds and can be stored on the front of the CSI Base.  -The CSI Offset Work...

E55144 - CSI Drill Spindle -.44HP 220/380V

Works for 220/230V or 460/480V 3-Phase. Does not come pre-wired.  Does not include the collet. Click here for ER11 Collet nut Click here for ER11 1/4" Collet

O55048 - CSI Screw Tube; 7-1/2"

Replacement metal tube for use in the C55848 Universal Screw Tube Plate for the CSI.  

C55308 - Router Carriage Wear Plate w/ 6 Pucks

This part has been specifically designed for use with the CSI Next. This assembly includes 1 wear plate, 1 puck guard, 1 slider, 6 delrin pucks and the necessary fittings for installation.

CSI ER20 Collet Nut

ER20 Collet Nut 

CSI ER20 Spindle Collet (D1200)

CSI ER20 Spindle Collet (D1200)

D55025 - CSI Drill ER 11 1/4" Collet

E55327 - CSI 3 HP Router Spindle

Works for 220/230V or 460/480V. Does not come pre-wired. Does not come with collet. Click here for ER20 Collet nut Click here for ER20 3/8" Collet

ER 11 Collet Nut - Teknomotor

ER 11 Collet Nut - Collet nut only. Does not include the collet.