N70118 - Button Poly Foot Pad 1 x 1/8" AA70NA - 5 pack

The clamp foot pad keeps material secured while the pocket is cut and drilled.   This is a 5 pack.

C00200 - TSM Hold Down Foot w/ Pad

P00117 - Router Feed Rate Valve (See notes for TSM-35)

Used on TSM-20, TSM-21 and TSM-35 as the Router Feed Rate valve. Also used on TSM-35 as the Drill Feed rate and Drill Delay valve. One in each position. SMC Flow Control AS2000-N01

E00491 - Foot Pedal w/ 8' Cord - Line Master 491-SC36

C00012 - Castle Door Hinge Set w/ Screws (2 Male & 2 Female)

 

P53000 - Monnier Regulator 101-3000-2

 

D50038 - Porter Cable 3/8" Collet Assy #6902 (DISCONTINUED)

The Porter Cable 3/8" collet assembly has been discontinued by the manufacturer You can purchase a 1/2" to 3/8" universal collet reducer here N00538 - 1/2" to 3/8" Collet Reducer The collet reducer will work with Porter Cable 1/2" collet 42950, or any...

C00015 - Castle Door Handle Assembly

H00141 - Bar Knob 1/4"-20

H00141 Bar Knob 1/4"-20 Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the H00141 Bar Knob 1/4"-20 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

E60286 - Snap Action, Pushbutton Microswitch

Used in three postions on the TSM-20 as the Wood sensor switch, Router stop switch and Drill Stop switch.

C21004 - Drive Cylinder Assembly w/ SQE's

E82421 - PC6902 Motor Brush

E75762 - 30 Amp Power Switch

E75762 30 Amp Power Switch Specifically engineered for use with the Castle TSM-12, TSM-21, and TSM-22 line of Pocket Hole Machines, the E75762 30 Amp Power Switch is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial...

P10320 - SQE 10-32 Clippard

Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies...

P10001 - SQE Humphrey Valve

C21006 - TSM-21 Worktop Assembly For Castle Pocket Cutter Machine

This replacement worktop fits both the TSM-20 and TSM-21 pocket cutters. Castle USA is your number one source for superior quality woodworking equipment, tools and accessories. We pride ourselves on providing our customers with the absolute best and...

D00401 - Black Plastic Door Hinge, Male half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21 and TSM-35 Note: Clamp Foot sold separately

E20126 - Fabco 120V Solenoid Coil

D00402 - Black Plastic Door Hinge, Female half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

P13013 - Solenoid Manifold w/ Coils

C00215 - Complete TSM Clamp Cylinder Assembly

Used on TSM-20, TSM-21 and TSM-35. Clamp cylinder assembly: complete with Air inlet fitting, Clamp Foot, Foot pad, Jamb Nut and Mounting Nut.

M00235 - Foot Switch Guard - Yellow

N20001 - TSM-20 Single Coil Bar Spring

C01411 - Parker Filter Assembly

Extend the life of your solenoids. This filter assembly keeps the air supply into your TSM-20 or TSM-21 clean and dry.

E60284 - Snap Action, Lever Micro Switch

C00010 - Castle Front Door Assembly

H25061 - TSM-21/TSM-22 Extension Spring

Extension spring for the TSM-20, TSM-21, and TSM-22.  Holds the router carriage in neutral position at rest and helps with the carriage return.

P20202 - Brass Miniature Fitting 10-32 Female Hex Coupling