B06532 Castle 100/110 Drill bit

Castle 100 5/32" Drill Bit, 4.5" length.     This bit is intended to drill the pilot hole when mounted on the Castle 100 or Castle 110 Portable Pocket Cutter.     *Not compatible with the TSM Models.  

B00516 - Castle 100 Router Bit

  5/16 Router Bit for the Castle 100.  Shank size is 1/4". The 5/16 Router Bit is to be used exclusively with the Castle 100 Portable Pocket Cutter.    *Will not work with the TSM models or any other applications.   BULK...

E16224 - Secondary Fuse 2A for older TSM-35s

2amp secondary Fuse, was orginally used for TSM-35s with older transformers like the Hammond E55750 and Micron E35713. Keep one or two of these fuses handy for those times when the fuse blows. Make sure that you are not stranded in the middle of your...

E91024 - Sprecher & Schuh Contactor

Sprecher & Schuh CA8-09-10-24Z Contactor for Castle TSM-35 & TSM-31.  Use with TSM-31 Single Phase Sprecher & Schuh Overload (E94061) or TSM-35 230V 3ph Sprecher & Schuh Overload (E94060) or TSM-35 480V 3ph Sprecher &...

E94061 - TSM-31 220v Single Phase Overload - Sprecher & Schuh

Sprecher & Schuh CT8-C10 Single Phase Overload.  Use this overload with Sprecher & Schuh Contactor (E91024)    

P01814 - Legris 1/8” NPT Female x 1/4” Straight Push-To-Connect Fitting (P01814)

Legris 1/8” NPT Female x 1/4” Straight Push-To-Connect Fitting is used on the TSM-35 to connect the air pressure switch to the airline. Push-in fittings allow fast circuit assembly for conveying compressed air, gas or liquids at a wide range...

Fixed Base For Bosch Colt Palm Woodworking Routers (PR001)

The quick-clamp system allows the router’s motor to be easily adjusted or moved from base to base. The base also features enhanced bit capacity, accepts bits up to 1-5/16” in diameter, finger support pockets for additional stability,...

Bosch Router Fixed Base (RA1161) for 1617/1618 series routers

The Bosch Router Fixed Base (RA1161) is built for the 1617/1618 series routers and features durable hardwood handles. For fast, precise bit depth adjustment, this fixed base has a coarse and microfine adjustment system with a resettable depth indicator...

G21007 - TSM-21/22 Backstop Plate For Woodworking Router

The router stop switch is mounted to this bracket and you can make adjustments to the web with this plate. This plate is only compatible with the TSM-22 and TSM-21 machines that have had a K21124/K21123 installed. When you are in need of superior...

AT-Race 4' x 12' Face Frame Assembly Table

Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables...

C21006 - TSM-21 Worktop Assembly For Castle Pocket Cutter Machine

This replacement worktop fits both the TSM-20 and TSM-21 pocket cutters. Castle USA is your number one source for superior quality woodworking equipment, tools and accessories. We pride ourselves on providing our customers with the absolute best and...

F14219 - 1/4-20 x 2” Ribbed Neck Carriage Bolt - OBSOLETE

This has been replaced by F14234  

P10318 - 10-32 x 3/32 White Nylon L Barb

Obsolete-See Notes - 3/32 x 1/8 White Nylon T Barb

No longer available, please use a push-in fitting similar to this one from McMaster Carr, https://www.mcmaster.com/5779K666/   P33218 - 3/32 x 1/8 White Nylon T Barb Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in...

B00532 - 5/32” Premium Drill Bit Split Point With 1/4” Shank

The Castle woodworking 5/32” Drill Bit is the perfect fit when you would like a larger hole than our 9/64” bit can provide. This bit works well on all materials and is more than suitable for the majority of your pocket cutting needs. When you...

P33216 - 3/32 hose ID x 1/16 hose ID White "T" Barb

P33216 - 3/32 hose ID x 1/16 hose ID White "T" Barb When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies...

P31302 - 1/8 tube ID Black "T" Barb

P31302 - 1/8 tube ID Black "T" Barb When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies. Whether you need a...

P18162 - 1/8M x 1/8 tube ID Black Nylon Barb

P18162 - 1/8M x 1/8 tube ID Black Nylon Barb Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute...

P16182 - 1/8 OD x 1/16 ID Black Tube

Price per foot.

P01418 - 1/4 OD x 1/8 ID Black Tube

Price per foot.

M00235 - Foot Switch Guard - Yellow

C21005 - TSM-21/TSM-22 Drive Cylinder Assembly / Parker Valve Version

Cylinder with elbow fittings and clevis bracket.  For use in TSM-21 machines serial numbers 61076 and higher.

M35017 - TSM-35 Drill Motor Plate

Sioux Drill Motor Mounting Plate.

E35420 - Air Pressure Switch - OBSOLETE

NOTE: The air pressure switch is no longer used in the TSM-31 and the TSM-35. Its removal does not constitute a safety issue.  Customers with older machines with pressures switches can bypass them by following the instructions in the TSM-31/TSM-35...

N00538 - 1/2" to 3/8" Collet Reducer

This collet reducer bushing is used in a 1/2" collet to allow it to accept 3/8" bits. It can be used in all 1/2" router collets. Contact us for application information and installation tips. When you are in need of premier woodworking tools and supplies,...

P00018 - 1/8” NPT Brass Muffler/Breather (P00018)

This ⅛ NPT Brass Muffler/Breather will fit the exhaust port in all TSM-21, TSM-22, TSM-35 and TSM-31 3 way and 4 way solenoids. Technical specifications: Thread: 1/8” NPT Material: brass

P53202 - 5/32 OD x 3/32 ID Black Tube

5/32 OD x 3/32 Black Polyurethane Tube Price per foot.

AT-Race 4' x 8' Face Frame Assembly Table

Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping arms that smoothly glide on an open beam, providing...

K21124 -TSM-21 Bosch Carriage Upgrade Assembly [Motors NOT Included]

This quick-to-install upgrade will bring your TSM-21 up-to-date with available, long-lasting, reliable motors (Not included) and is compatible with serial numbers 50696 to 64323.   NOTE: This kit DOES NOT work with the Castle TSM-20 Pocket...

B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank

The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split Point Drill Bit will work well in all materials...

T22058 - Pneumatic High-Quality Woodworking Driver ASG HDP58 (w/ fittings (1)P48003 and (1)P55085)

ASG H Series direct drive pneumatic screwdrivers offer affordable productivity. H Series tools feature a unique ergonomic light weight thermoplastic design to provide comfort and gripping power, and are reversible.  Specifications Model No.:...

P10320 - SQE 10-32 Clippard

Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies...

F14458 - 1/4-20 x 1-1/4" Socket Head Cap Screw For Pocket Cutter Machine

This set screw is used to adjust left/right carriage position on the TSM-21 and TSM-35. It is also used as the threaded mounting post for the porter cable 7301 in the TSM-21. When you are in need of premier woodworking tools and supplies, turn to Castle,...

N70118-005 5 pack- Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.   This is a 5 pack.

D50044 - Sioux 1/4" Collet

F11412 - 1-1/4-12 Jam Nut, Zinc Plated

Used to hold the clamp cylinder in place.

B02964-010 9/64" Brad and Spur Premium Bit - 10 pack

Save 10% by purchasing in packs of 10 10-pack  Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the...

B00964-010 - 9/64" Castle Drill Bit, Brad w/ 1/4" Shank - 10 pack

 Save 10% by purchasing in packs of 10 10-pack  This is the most popular Castle Woodworking Drill Bit.  The Brad And Spur tip tracks well in all types of materials and is recommended for use with a No.7 screw. This bit is ideal...

D21638 - Bosch 3/8" Collet Assembly

D21638 - Bosch 3/8" Collet Assembly for Bosch 1617 and 1617EVS routers.  

N21143 - TSM-21/TSM-22 U-Bolt for Bosch drill motor

Drill motor U-bolt for the TSM-21/TSM-21 with Bosch routers.   *for machines with serial #64324 and higher

K21123 - TSM-21 Bosch Carriage Upgrade Assembly with Motors

 This quick-to-install upgrade will bring your TSM-21 up-to-date with available, long-lasting, reliable motors and is compatible with serial numbers 50696 to 64323. NOTE: This kit DOES NOT work with the Castle TSM-20 Pocket Cutter...

E21617 - Router Motor Bosch #1617EVS *for machines with serial #64324 and higher

Bosch 1617EVS 2.25HP Router Motor *This service part is for machines with serial #64324 and higher.

E21610 - Trimmer Motor Bosch #PR20EVS *for machines with serial #64324 and higher

Bosch Colt 1.0HP Trimmer Router Motor *This service part is for machines with serial #64324 and higher.

TSM-30 Series Pocket Cutter Machines

TSM-30 series features heavy duty construction throughout, with easy, top-down access for quick tooling changes. Designed for continuous or multi-shift production in a broad variety of woodworking manufacturing environments, the TSM-30 Series Pocket...

C00010 - Castle Front Door Assembly

Includes the following: CP0010 Front Door with Female Hinges  x1 D00710 Black plastic door hinge, male half (D1405) x2  G00101 Door Spring Clip Assembly x1  H00141 1/4-20 Bar Knob (H700)  x1 F14125 1/4-20 x 1/2 screw (F750) x1 F10010...

B41093 - White Oak Wood Plugs For 3/8” Castle pockets, 100 pieces

    These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of White Oak wood. When you are in need of...

B41091 - Mahogany Wood Plugs For 3/8” Castle Pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Mahogany wood. When you are in need of premium...

P01957 - Sioux Air Drill

Sioux air drill for the Castle TSM-35 and TSM-31 Specifically engineered for use with the Castle TSM-35 and TSM-31 pocket hole machines, the P01957 - Sioux Air Drill is an essential component to have on hand. Engineered to hold up to heavy duty use of...

S00099 - Castle Baseball Cap

Castle logo cap.  Show your carpentry skills with pride! The Castle baseball cap is crafted of brushed cotton with an adjustable velcro strap. The Castle Inc. logo is intricately embroidered on the crown, Order yours today!...

C35001 - TSM-35 Rapid Index Assembly

Rapid Index Assembly for models TSM-31 and TSM-35 only.  Will not work with any other Castle machine model.

P49410 - Parker / Humphrey 410 24V DC Solenoid, 4 port for TSM-35

E82421 - PC6902 Motor Brush Porter Cable

For Porter Cable PC6902 routers

E21024 - TSM-21/TSM-22 Solid State Control Board

This is latest version of the control board for the TSM-21 and the TSM-22.  Works in all TSM-21 and TSM-22.

C11215 - TSM-11 / TSM-12 Clamp Assembly

C30230 - LB-23/30 V Link Belt

H30386 - 3/8"-16 Hand Return Spring Plunger

C30011 - LB-30/30 Express Bit Holder w/ Set Screw

*drill bit not included

P53293 - Clear Urethane Tube 5/32" OD x 3/32" IN

P31032 - 10-32 x 10-32 White Nylon Coup

P18230 - White Ny L Barb 1/8"M x 1/8"

P18165 - 1/8 NPT x 1/16 Barb 90 Degree Brass Fitting

P18161 - 1/8M x 1/16" White Nylon Barb

P18030 - Brass Nipple 1/8" NPT x 3"

P18011 - 1801-1 White Nylon Reducer 1/8"-27 x 10/32

P16181 - White Urethane Tube 1/8" OD x 1/16" ID

P14414 - Push-In Swivel Elbow 1/4"M x 1/4"

This is the fitting that is typically used on the top of the clamp cylinders for the TSM-20, TSM-21, TSM-22, TSM-31, and the TSM-35 machines.

P14214 - Hex Close Nipple 1/4"M

P14116 - 1/4" Male 90° Elbow Adapter

P14113 - Parker Air Pressure Regulator

Air Pressure Regulator Parker 14R113FC

P12447 - Swivel Elbow 1/4" x 5/32" PI *SEE NOTES BEFORE PURCHASING

Note:  Norgren has redesigned this fitting and it no longer works as a replacement for the AT Clamp Assembly.  Unfortunately, at this time there is not a fitting that will work on the AT Clamp Assembly.

P10326 - Black Nylon Barb 10-32 x 3/32"

P10325 - ID Black Barb 10-32 x 5/32"

P10322 - Black Nylon Barb 10-32 x 1/16"

P10321 - White Nylon Barb 10-32 M x 1/16"

P10316 - White Nylon Barb 10-32 x 3/32"

P00538 - Push-In Straight Fitting 1/8"M x 5/32"

Pnuematic push in fittings for TSM 35 and CSI-Next 

P00117 - Router Feed Rate Valve (See notes for TSM-35)

Used on TSM-20, TSM-21, TSM-22, TSM-31, and the TSM-35 as the Router Feed Rate valve. Also used on the TSM-31 and the TSM-35 as the Drill Feed rate and Drill Delay valve. One in each position. SMC Flow Control AS2000-N01

N70118 - Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.

N21351 - Small Clamp Foot

B410890 - Birch Wood Plugs For 3/8” Castle pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Birch wood. When you are in need of premium...

B41088 - Walnut Wood Plugs For 3/8” Castle pockets, 100 pieces

    These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Walnut wood. When you are in need of premium...

B41087 - Pine Wood Plugs For 3/8” Castle pockets, 100 pieces

    These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Pine wood. When you are in need of premium...

B41086 - Red Oak Wood Plugs For 3/8” Castle pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Red Oak wood. When you are in need of premium...

B41085 - Maple Wood Plugs For 3/8” Castle pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Maple wood. When you are in need of premium woodworking...

B41084 - Hickory Wood Plugs For 3/8” Castle pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Hickory wood. When you are in need of premium...

B41083 - Cherry Wood Plugs For 3/8” Castle pockets, 100 pieces

Out of Stock   These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Cherry wood. When you are in need of...

B41082 - Beech Wood Plugs For 3/8” Castle pockets, 100 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Beech wood. When you are in need of premium...

B41081 - Ash Wood Plugs For 3/8” Castle pockets, 100 pieces

    These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Ash wood. When you are in need of premium...

B41080 - Alder Wood Plugs For 3/8” Castle pockets, 100 pieces

Out of Stock   These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 100-piece pack are made of Alder wood. When you are in need of...

B41054 - Hickory Wood Plugs For 3/8” Castle pockets, 25 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 25-piece pack are made of Hickory wood. When you are in need of premium...

B41053 - Cherry Wood Plugs For 3/8” Castle pockets, 25 pieces

  These wood plugs fit all Castle 3/8" Pockets (not for use in the Castle 100 or Castle 110) and are available in multiple popular wood species. The plugs in this 25-piece pack are made of Cherry wood. When you are in need of premium...

B00622 - #2 Robertson Square Driver Bit, 6" Shank

BULK DEAL:   Buy 5 - 9 and get $0.35 off Buy 10 or more and get $0.50 off  

P50638 - In-Line Check Valve 3/8"

When running an air system on your Castle pocket hole machine, it is critical to install safeguards that contribute to responsible air management. The one way, inline check valve prevents pressure spikes in the system and protects the pump. Ideal for...

P35389 - TSM-35 3/8" Drill Hose Assembly

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. The ⅜” drill hose ensures that the air system runs safely. Ideal for vacuum systems, blowers, and more!...

P35300 - TSM-35 Router Cylinder

P35250 - Humphrey 250A-3-10 Pilot Valve

P35125 - TSM-35 Drill Cylinder

P35070 - TSM-35 Gauge

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A gauge ensures that the air system runs safely, it protects the machine as well as the components attached to the air...

P35069 - Parker TSM-31/35 FRL Connector

P35068 - Parker TSM-31/35 FRL Mount Bracket PS955P