220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle

Overview
Product Videos
Reviews

Product Description

220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle

Note: This is the 220 volt version that comes with a European Schuko electric plug.

Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for installers, custom cabinetmakers, woodworkers and DIYers who want superior, “no-creep” joints. With the easy-to-use Castle 110, you can cut our exclusive low-angle pockets in seconds, creating strong, stable and attractive joints for cabinets, bookcases, face frames and other woodworking projects. The Castle 110 minimizes undesirable joint shift, a common hazard when using a typical pocket hole jig. And, because the screw's pilot hole is drilled from the opposite side, there's no dimpling or trash at the end of the board, allowing joined pieces to fit as tightly as possible.

Castle Pockets have smooth clean finishes and join seams flush, minimizing shift.


Easy to adjust clamp height	Dust Extraction Port (hose not included)	Easy to align and cut perfect pockets every time

Features:

3 Degree Pocket minimizes joint shift (learn more here)
Pockets are cut by a router, not by a drill, so results are clean and free of tear-out
Portable and adjustable, 220V 450w Co-Matic router with European Schuko Plug
Factory assembled and adjusted. No additional setup required.
Designed and assembled in the USA from US and global components.
Approximate size: 15" high x 5" wide x 8 1/4" deep, Weight 9lbs

The Professional Bundle includes the Base Model along with the following:

1 Black and Red Systainer case (L187) with foam insert insert for the 110 and the basic accessories
1 extra Standard Roughing Router Bit Helix (Up-Cut) (Part B02518)
1 8mm Roughing Router Bit Reverse Helix (Down-Cut) (Part B02517)
1 extra T20 Torx driver bit, 6" round shaft (Part B00620)
Castle Face Clamp (Part B40005)
Castle Tight Access Driver (Part K10020)

Base Model Includes:

Operator Manual with Warranty Activation Card
Overlay plate for quickly machining thinner materials (Part C11001)
Bit Set-up Block with integrated bit height gauge (Part C11010)
Collet Wrenches (Part K11000)
T20 Torx driver bit, 6" round shaft (Part B00620)
Standard Roughing Router Bit Helix (Up-Cut) (Part B02518) [installed and factory adjusted for 3/4" stock]
Extra long (4.5") 5/32" drill bit for pilot hole (Part B06532)
Box of 250 count, 1-1/2" Torx Hi-Low pocket screw (Part B04112-0250)
Box of 250 count, 1-1/4" Torx Hi-Low pocket screw (Part B04114-0250)
Work Stop Set, includes stop bar, left and right work stops [Part C11060]

Optional:

Smooth Router Bit for super clean/chip free pockets in Melamine, Plywood, Softwoods, and Hardwoods. (Reverse-Helix geometry (Down-Cut)) [Part B02516]

Take a look at the media reviews on our Castle 110

See the most Frequently Asked Questions

Video on how to properly set the stock thickness and clamping pressure

Complete YouTube Video Playlist on the Castle 110

Product Information Sheet for Print

Castle 110 Operator Manual

Questions about the Castle 110? Call or text Phil (707) 665-1930