P35125 - TSM-35 Drill Cylinder

P35070 - TSM-35 Gauge

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A gauge ensures that the air system runs safely, it protects the machine as well as the components attached to the air...

P35069 - Parker TSM-31/35 FRL Connector

P35068 - Parker TSM-31/35 FRL Mount Bracket PS955P

P35067 - Parker TSM-31/35 Lubricator

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A Parker lubrication system ensures that the air system runs safely, it protects the machine as well as the components...

P35066 - Parker TSM-31/35 Filter/Regulator

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A Parker lubrication and filter system ensures that the air system runs safely, it protects the machine as well as the...

P35026 - Parker 02FA06A 1/4" Disposable In-Line Filter

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A 1/4" Disposable In-Line Filter ensures that the air system runs safely, it protects the machine as well as the...

N35353 - TSM-35 Small Pulley

Specifically engineered for use with the Castle line of Pocket Hole Machines the N35353 TSM-35 Small Pulley is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change in...

N35352 - TSM-31/35 Spindle Housing, old PC style

Older style Spindle housing for TSM-31 and TSM-35 machines that have the Porter Cable Chuck and Collet (serial numbers 68269 and below).  This spindle housing will NOT work with newer machines that have the new Bosch chuck and collet system...

N35313 - TSM-31/35 Router Spindle, old PC Style

Older style Router Spindle for TSM-31 and TSM-35 machines that have the Porter Cable Chuck and Collet (serial numbers 68269 and below).  This Router Spindle will NOT work with newer machines that have the new Bosch chuck and collet system...

H78065 - TSM-31/35 Router Spindle Bearing

Spindle bearing for TSM-31 and TSM-35 router spindles. -2 are required for the older style router spindle for TSM-31 and TSM-35 machines that have the Porter Cable Chuck and Collet (serial numbers 68269 and below).   -Only 1 H78065 is...

H35013 - TSM-35 Nylon Wear Strip

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H35013 TSM-35 Nylon Wear Strip is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick...

H35005 - TSM-35 Motor Slinger for Baldor/Marathon motors

H35005 - TSM-35 Motor Slinger for Baldor/Marathon 3 phase motors Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H35005 TSM-35 Motor Slinger is a spare part you need to have. Engineered to hold up to heavy duty...

H12075 - Flat Belt (Grey) 1 x 20.75 For newer machines

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H12075 Flat Belt (Blue) 1 x 20.75 DG1 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

H11775 - Nylon Flat Belt (Green) 1 x 17.75 for older machines

For use in older TSM-35 machines.  (Unmodified machines with serial numbers 3000 to 54334)   Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H11775 Nylon Flat Belt (Green) 1 x 17.75 is a spare part you...

H00058 - Bushing QT 5/8"

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H00058 - Bushing QT 5/8" is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change...

E35424 - TSM-35 Solid State Control Board

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the E35424 TSM-35 Solid State Control Board is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

E35010 - TSM-35 "End of Cycle" Switch

Used on TSM-35 for end of cycle sensing on the Drill and Router drive cylinders. Replaces Sick RZT6-03ZUS-KWO end of cycle switch.   Mounting strap may be reused.  If strap needs replacement order pn: E35009 Specifically engineered for...

E35009 - TSM-35 "End of Cycle" Switch Mounting Strap

Used on TSM-35 to mount "End of Cycle" Sick switch pn:E35010 to Drill and Router drive cylinders. Sick BEF-KHZ-RT1-63 Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the E35009 - TSM-35 "End of Cycle"  Switch...

E03322 - Security Switch Key, ABB LSA30

E03322 - Security Switch Key, ABB LSA30 Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the E03322 Security Switch Key, ABB LSA30 is a spare part you need to have. Engineered to hold up to heavy duty use of an...

E03300 - ABB LS35 Security Interlock Switch

  Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the E03300 ABB LS35 Security Interlock Switch is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

E03015 - Siemens Contactor, 24 VAC/50-60 HZ

Siemens contactor 3RT1016-1AB01 24 VAC/ 50-60 Hz. Use with Siemens Overload 3RU1116-1GB0 208-230V (E03161) or Overload 3RU1116-1CB0 460V (E03116) NOTE: Castle no longer carries Siemens contactors or overloads.  To replace, please purchase E91024 -...

C35101 - TSM-35 Safety Blade Assembly

C35101 - TSM-35 Safety Blade Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C35101 TSM-35 Safety Blade Assembly is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial...

C35005 - TSM-35 Drill Delay Valve Assembly

C35005 - TSM-35 Drill Delay Valve Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C35005 TSM-35 Drill Delay Valve Assembly is a spare part you need to have. Engineered to hold up to heavy duty use of an...

C35002 - Clippard TSM-31/35 Filter/Regulator/Luber Assembly

USE P35075. Click here: SNS FRL This Clippard branded FRL will retro fit to all TSM-35 and TSM-31 machines. Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C35002 TSM-35 Filter/Regulator/Luber Assembly is a spare...

E03000 - TSM-31/TSM-35 Stop Switch

C30352 - TSM-35 Stop Switch Actuator Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C30352 - TSM-35 Stop Switch Actuator Assembly is a spare part you need to have. Engineered to hold up to heavy duty use...

E03041 - TSM-35 Start Switch

C30351 - TSM-35 Start Switch Actuator Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C30351 - TSM-35 Start Switch Actuator Assembly is a spare part you need to have. Engineered to hold up to heavy duty...

P21324 - Mead Solenoid, TSM-21 up to SN:61036 see NOTES

  Used for Clamp, Router and Drill functions on older TSM-21s. Mead 5440-0 Isonic 3 way solenoid valve. Castle suggests upgrading to our new Humphrey 3 way solenoids (instead of replacing Mead solenoids) with our upgrade kit part# K21021. ...

P21306 - TSM-21 /TSM-22 Drive Cylinder (w/o SQE valves)

Pneumatic Drive Cylinder for TSM-21, without SQE valves Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the P21306 Drive Cylinder (w/o SQE valves) is a spare part you need to have. Engineered to hold up to heavy duty...

P21224 - 3 Port Humphrey Solenoid for TSM-22 (See notes for TSM-21, and TSM-31/TSM-35.)

Humphrey 310, 3 Port Solenoid Specifically engineered for use with the Castle TSM-22, TSM-21 (after SN:61076), TSM-30 series(Clamp function ONLY) line of Pocket Hole Machines the P21224 3 Port Humphrey Solenoid is a spare part you need to have...

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare part you need to have. Engineered to hold up to heavy...

N21366 - TSM-21 Bar Spring

Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the N21366 TSM-21 SC Bar Spring is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick...

N21142 - TSM-21 U-Bolt for main router

N21142 TSM-21 U-Bolt for main router (not for the drill router). Works with PC and Bosch routers, plus machines upgraded with the Bosch carriage upgrade.  Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

H00141 - Bar Knob 1/4"-20

H00141 Bar Knob 1/4"-20 Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the H00141 Bar Knob 1/4"-20 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

E75762 - 30 Amp Power Switch

Specifically engineered for use with the Castle TSM-12, TSM-21, and TSM-22 line of Pocket Hole Machines, the E75762 30 Amp Power Switch is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

E73012 - Motor Brush PC 7301 Assembly Porter Cable

E73012 Motor Brush Assembly for the Porter Cable PC 7301 Router    

E11424 - 24 VAC Multi Tap Transformer

E10850 - Reed Switch & Magnet, Safety, Router Stop & Drill Stop

Used on TSM-21 for Safety buttons, Router Stop and Drill Stop. Used on TSM-35 for Safety buttons. Used on Line Boring machines as Bit cover safety switch Reed Switch and Magnet, set.

E07041 - Foot Pedals Microswitch

Replaces stock microswitch in all footpedals.  Omron Mfr #Z-15G-B7-K

E00491 - Foot Pedal w/ 8' Cord - Line Master 491-SC36

D00720 - Tapered Black Plastic Door Hinge, Female Half

This door hinge is tapered at one end.

D00710 - Tapered Black Plastic Door Hinge, Male Half

This door hinge is tapered at one end.

C21101 - TSM-21/TSM-22 Safety Blade Assembly

C21004 - Drive Cylinder Assembly w/ SQE's

C00215 - Complete TSM Clamp Cylinder Assembly

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35. Clamp cylinder assembly: complete with Air inlet fitting, Clamp Foot, Foot pad, Jamb Nut and Mounting Nut.

C00210 - TSM Face Plate w/ Adhesive

C00200 - TSM Hold Down Foot w/ Pad

C00015 - Castle Door Handle Assembly

C00012 - Castle Door Hinge Set w/ Screws (2 Male & 2 Female)

T00250 - Carbide Replacement Blade for EQ Guillotine

This blade is double sided for longer life.

C03003 - EQ Edgebander Glue Reservoir Assembly Rev-1

B03003 - Equalizer Hopper Extension

For a downloadable PDF version to make your own: Glue Hopper Extension PDF

K08005 - Face Frame Assembly Table Master Switch Kit

K08004 - AT Cylinder Rebuild Kit, older version

AT Clamp Cylinder Detail AT Clamp Cylinder Rebuild

H00600 - 006 Buna N O-Ring

H00352 - 003 Buna-N O-Ring

G11242 - AT Wear Strip

C08400 - AT Cylinder Piston

C08345 - AT Arm Spacer Assembly

C08161 - AT Arm Bearing Assembly

C08002 - AT Clamp Cylinder Assembly - older version - DISCONTINUED

Older style frame table clamp, built to order.  DISCONTINUED

C08000 - AT Gun Hose Assembly

C00848 - AT-8 Work Top Assembly

This product will be shipped via LTL truck.   Call us at 800.282.8338 for a shipping quote.

N08096 - AT-96 Clamp Foot

N08011 - AT Air Cylinder Ring

N08010 - AT Air Cylinder Piston

N08006 - AT Cylinder Sleeve

N08005 - AT Cylinder Foot

N08001 - AT Valve Piston Delrin

P53000 - Monnier Regulator 101-3000-2

P32012 - Clamp Pilot Valve

Pilot valve, used in conjuction with the Clamp solenoid to control the Clamp cylinder. Clippard, Model 2012, 3 way valve.

P20202 - Brass Miniature Fitting 10-32 Female Hex Coupling

P13013 - Solenoid Manifold w/ Coils - DISCONTINUED

The complete manifold assembly as shown, Fabco #FVS-345, has been discontinued by the manufacturer.   Out of the 3 solenoids included in the FVS-345 manifold, only the clamp solenoid is still available by other online sellers.  Here are...

P10001 - SQE Humphrey Valve

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35 Note: Clamp Foot sold separately

N20001 - TSM-20 Bar Spring

E60286 -Pushbutton switch, Discontinued SEE NOTES

Snap Action, Pushbutton Microswitch. Used in three positions on the TSM-20  for the Router stop switch and Drill Stop switch, and sometimes the Wood sensor switch. This switch has been discontinued.   It can still be purchased from several...

E60284 - Lever Micro Switch-Discontinued, SEE NOTES

Snap Action, Lever Micro Switch.  Used for the wood sensor switch on some TSM-20s. This switch has been discontinued.   It can still be purchased from several venders including Grainger.  Grainger Item # 6X284 Mfr. Model Omron...

D00402 - Black Plastic Door Hinge, Female half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

D00401 - Black Plastic Door Hinge, Male half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

B03055 - Solid Carbide Line Boring Bit

B03055 - Solid Carbide Line Boring Bit      

B00764 - 7/64” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for screw insertion—it can also be used with smaller screws. The 7/64” split point will work...

B00316 - 3/16” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will provide a slip fit for easy screw insertion. When you are...

B00338 - 3/8” Solid Carbide 3-Flute Router Bit

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all materials, including composites and dense hardwoods such as hickory. The three-flute bit can be resharpened,...

TSM-12 Benchtop Pocket Cutter Machine

Get all of the benefits of a Castle Professional Pocket Cutting Machine in a benchtop model - the TSM-12 routs the 6 degree, low-angle Castle Pocket with no tear out in less than 2 seconds. The superior low screw angle minimizes joint shift while...

B00438 - 3/8" Cobalt Steel 4-Flute Roughing Router Bit

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will want to use our Solid Carbide bit - B00338.) The rough mill design routs a consistently clean and splinter...

E27301 - Trimmer Motor PC# 7301 - Obsolete

The Porter Cable 7301/7310 trimmer motor has been discontinued and is no longer available. You may be able to have motors rebuilt at a DeWalt Service Center or small motor repair shop.Whats Next? The Castle TSM-21 is now built with Bosch motors...

B01338 - 3/8" Solid Carbide 3-Flute Reverse Helix Router Bit

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. The groove pattern of the cutting teeth on this bit create a downward cutting motion for better finishes...