E10850 - Reed Switch & Magnet, Safety, Router Stop & Drill Stop

Used on TSM-21 for Safety buttons, Router Stop and Drill Stop. Used on TSM-35 for Safety buttons. Used on Line Boring machines as Bit cover safety switch Reed Switch and Magnet, set.

H12075 - Flat Belt (Grey) 1 x 20.75 For newer machines

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H12075 Flat Belt (Blue) 1 x 20.75 DG1 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

N70118-005 5 pack- Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.   This is a 5 pack.

C00200 - TSM Hold Down Foot w/ Pad

P00018 - 1/8” NPT Brass Muffler/Breather (P00018)

This ⅛ NPT Brass Muffler/Breather will fit the exhaust port in all TSM-21, TSM-22, TSM-35 and TSM-31 3 way and 4 way solenoids. Technical specifications: Thread: 1/8” NPT Material: brass

E03000 - TSM-31/TSM-35 Stop Switch

C30352 - TSM-35 Stop Switch Actuator Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C30352 - TSM-35 Stop Switch Actuator Assembly is a spare part you need to have. Engineered to hold up to heavy duty use...

C00012 - Castle Door Hinge Set w/ Screws (2 Male & 2 Female)

 

N70118 - Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.

C00015 - Castle Door Handle Assembly

P35300 - TSM-35 Router Cylinder

H00141 - Bar Knob 1/4"-20

H00141 Bar Knob 1/4"-20 Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the H00141 Bar Knob 1/4"-20 is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on...

P00538 - Push-In Straight Fitting 1/8"M x 5/32"

Pnuematic push in fittings for TSM 35 and CSI-Next 

H35013 - TSM-35 Nylon Wear Strip

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H35013 TSM-35 Nylon Wear Strip is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick...

P10320 - SQE 10-32 Clippard

Air Management for the TSM-21, TSM-35, TSM-30 and TSM-31. When you are in need of premier woodworking tools and supplies, turn to Castle, Inc. We pride ourselves on providing our customers with the absolute best and highest quality carpentry supplies...

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare part you need to have. Engineered to hold up to heavy...

P35125 - TSM-35 Drill Cylinder

E35424 - TSM-35 Solid State Control Board

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the E35424 TSM-35 Solid State Control Board is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a...

H11775 - Nylon Flat Belt (Green) 1 x 17.75 for older machines

For use in older TSM-35 machines.  (Unmodified machines with serial numbers 3000 to 54334)   Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H11775 Nylon Flat Belt (Green) 1 x 17.75 is a spare part you...

D00710 - Tapered Black Plastic Door Hinge, Male Half

This door hinge is tapered at one end.

C00215 - Complete TSM Clamp Cylinder Assembly

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35. Clamp cylinder assembly: complete with Air inlet fitting, Clamp Foot, Foot pad, Jamb Nut and Mounting Nut.

H78065 - TSM-31/35 Router Spindle Bearing

Spindle bearing for TSM-31 and TSM-35 router spindles. -2 are required for the older style router spindle for TSM-31 and TSM-35 machines that have the Porter Cable Chuck and Collet (serial numbers 68269 and below).   -Only 1 H78065 is...

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21, TSM-22, TSM-31, and TSM-35 Note: Clamp Foot sold separately

D50044 - Sioux 1/4" Collet

F14219 - 1/4-20 x 2” Ribbed Neck Carriage Bolt - OBSOLETE

This has been replaced by F14234  

E03041 - TSM-35 Start Switch

C30351 - TSM-35 Start Switch Actuator Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C30351 - TSM-35 Start Switch Actuator Assembly is a spare part you need to have. Engineered to hold up to heavy duty...

N35313 - TSM-31/35 Router Spindle, old PC Style-DISCONTINUED

NOTE:  As of Sept. of 2025 this spindle has been discontinued.  You will need to purchase the new spindle that only comes as a complete assembly, see C35003.1 TSM-31/35 Router Spindle Assemly, New Bosch Style. Older style Router Spindle for...

C35005 - TSM-35 Drill Delay Valve Assembly

C35005 - TSM-35 Drill Delay Valve Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C35005 TSM-35 Drill Delay Valve Assembly is a spare part you need to have. Engineered to hold up to heavy duty use of an...

F14458 - 1/4-20 x 1-1/4" Socket Head Cap Screw For Pocket Cutter Machine

This set screw is used to adjust left/right carriage position on the TSM-21 and TSM-35. It is also used as the threaded mounting post for the porter cable 7301 in the TSM-21. When you are in need of premier woodworking tools and supplies, turn to Castle,...

C35101 - TSM-35 Safety Blade Assembly

C35101 - TSM-35 Safety Blade Assembly Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the C35101 TSM-35 Safety Blade Assembly is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial...

D00720 - Tapered Black Plastic Door Hinge, Female Half

This door hinge is tapered at one end.

N35352 - TSM-31/35 Spindle Housing, old PC style

Older style Spindle housing for TSM-31 and TSM-35 machines that have the Porter Cable Chuck and Collet (serial numbers 68269 and below).  This spindle housing will NOT work with newer machines that have the new Bosch chuck and collet system. Note:...

M00235 - Foot Switch Guard - Yellow

TSM-31/35 Router Spindle Assembly, New Bosch style with Bosch Wrenches

New Bosch Style TSM-31/TSM-35 Router Spindle Assembly.  This is our latest spindle with a Bosch chuck and collet.     Note: The old Porter Cable style spindle assembly is NO longer available. Machines with serial numbers...

F11412 - 1-1/4-12 Jam Nut, Zinc Plated

Used to hold the clamp cylinder in place.

N35353 - TSM-35 Small Pulley

Specifically engineered for use with the Castle line of Pocket Hole Machines the N35353 TSM-35 Small Pulley is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change in...

O15858 - TSM-31/35 Router Cylinder Bumper

O15858 - TSM-31/35 Router Cylinder Bumper Rubber bumper for the router cylinder for the Castle TSM-35 and TSM-31.  If you need to order a new router cylinder, this bumper is included with part C35021 - TSM-35 Router Drive Cylinder Assembly

M35017 - TSM-35 Drill Motor Plate

Sioux Drill Motor Mounting Plate.

C00010 - Castle Front Door Assembly

Includes the following: CP0010 Front Door with Female Hinges  x1 D00710 Black plastic door hinge, male half (D1405) x2  G00101 Door Spring Clip Assembly x1  H00141 1/4-20 Bar Knob (H700)  x1 F14125 1/4-20 x 1/2 screw (F750) x1 F10010...

H00058 - Bushing QT 5/8"

Specifically engineered for use with the Castle TSM-35 line of Pocket Hole Machines the H00058 - Bushing QT 5/8" is a spare part you need to have. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change...

C35001 - TSM-35 Rapid Index Assembly

Rapid Index Assembly for models TSM-31 and TSM-35 only.  Will not work with any other Castle machine model.

P35389 - TSM-35 3/8" Drill Hose Assembly

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. The ⅜” drill hose ensures that the air system runs safely. Ideal for vacuum systems, blowers, and more!...

P35070 - TSM-35 Gauge

When running an air system on your Castle TSM-35 pocket hole machine, it is critical to install quality components for air management. A gauge ensures that the air system runs safely, it protects the machine as well as the components attached to the air...

P50638 - In-Line Check Valve 3/8"

When running an air system on your Castle pocket hole machine, it is critical to install safeguards that contribute to responsible air management. The one way, inline check valve prevents pressure spikes in the system and protects the pump. Ideal for...