C08002 - AT Clamp Cylinder Assembly

C08000 - AT Gun Hose Assembly

C00848 - AT-8 Work Top Assembly

This product will be shipped via LTL truck.

N08440 - Extruded Aluminum Manifold AT Arm

N08096 - AT-96 Clamp Foot

N08011 - AT Air Cylinder Ring

N08010 - AT Air Cylinder Piston

N08006 - AT Cylinder Sleeve

N08005 - AT Cylinder Foot

N08001 - AT Valve Piston Delrin

P53000 - Monnier Regulator 101-3000-2

 

P32012 - Clamp Pilot Valve

Pilot valve, used in conjuction with the Clamp solenoid to control the Clamp cylinder. Clippard, Model 2012, 3 way valve.

P20202 - Brass Miniature Fitting 10-32 Female Hex Coupling

P13013 - Solenoid Manifold w/ Coils

P10001 - SQE Humphrey Valve

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21 and TSM-35 Note: Clamp Foot sold separately

N20001 - TSM-20 Single Coil Bar Spring

E60286 - Snap Action, Pushbutton Microswitch

Used in three postions on the TSM-20 as the Wood sensor switch, Router stop switch and Drill Stop switch.

E60284 - Snap Action, Lever Micro Switch

E20126 - Fabco 120V Solenoid Coil

D00402 - Black Plastic Door Hinge, Female half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

D00401 - Black Plastic Door Hinge, Male half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

B03055 - Solid Carbide Line Boring Bit

B03055 - Solid Carbide Line Boring Bit     BULK DEAL:   Buy 5 - 22 and get $1.95 off Buy 23 - 29 and get $3.00 off Buy 30 or more and get $3.95 off  

B00764 - 7/64” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for screw insertion—it can also be used with smaller screws. The 7/64” split point will work...

B00316 - 3/16” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will provide a slip fit for easy screw insertion. When you are...

B00338 - 3/8” Solid Carbide 3-Flute Router Bit

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all materials, including composites and dense hardwoods such as hickory. The three-flute bit can be resharpened,...

TSM-12 Benchtop Pocket Cutter Machine

Take a look at the media reviews on our TSM-12 Download Product Information Here   The TSM-12 benchtop pocket cutter machine is designed very similarly to Castle’s original pocket cutter. These machines have an amazingly long service life,...

B00438 - 3/8" Cobalt Steel 4-Flute Roughing Router Bit

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will want to use our Solid Carbide bit - B00338.) The rough mill design routs a consistently clean and splinter...

B01338 - 3/8" Solid Carbide 3-Flute Reverse Helix Router Bit

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. The groove pattern of the cutting teeth on this bit create a downward cutting motion for better finishes...