M00235 - Foot Switch Guard - Yellow

C21005 - TSM-21/TSM-22 Drive Cylinder Assembly / Parker Valve Version

Cylinder with elbow fittings and clevis bracket.  For use in TSM-21 machines serial numbers 61076 and higher.

P00018 - 1/8” NPT Brass Muffler/Breather (P00018)

This ⅛ NPT Brass Muffler/Breather will fit the exhaust port in all TSM-21, TSM-22, TSM-35 and TSM-31 3 way and 4 way solenoids. Technical specifications: Thread: 1/8” NPT Material:...

F14458 - 1/4-20 x 1-1/4" Socket Head Cap Screw For Pocket Cutter Machine

This set screw is used to adjust left/right carriage position on the TSM-21 and TSM-35. It is also used as the threaded mounting post for the porter cable 7301 in the TSM-21. When you are in need of...

N70118-005 5 pack- Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.   This is a 5 pack.

F11412 - 1-1/4-12 Jam Nut, Zinc Plated

Used to hold the clamp cylinder in place.

N21143 - TSM-21/TSM-22 U-Bolt for Bosch drill motor

Drill motor U-bolt for the TSM-21/TSM-21 with Bosch routers.   *for machines with serial #64324 and higher

C00010 - Castle Front Door Assembly

Includes the following: CP0010 Front Door with Female Hinges  x1 D00710 Black plastic door hinge, male half (D1405) x2  G00101 Door Spring Clip Assembly x1  H00141 1/4-20 Bar Knob...

E21024 - TSM-21/TSM-22 Solid State Control Board

This is latest version of the control board for the TSM-21 and the TSM-22.  Works in all TSM-21 and TSM-22.

N70118 - Button Poly Foot Pad 1 x 1/8"

The clamp foot pad keeps material secured while the pocket is cut and drilled.

P21306 - TSM-21 /TSM-22 Drive Cylinder (w/o SQE valves)

Pneumatic Drive Cylinder for TSM-21, without SQE valves Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the P21306 Drive Cylinder (w/o SQE valves) is a spare part...

G00234 - Bit Gauge Aluminum Bar 1/8" x 1 x 2-3/4"

G00234 - Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the G00234 Bit Gauge Aluminum FBar 1/8" x 1 x 2-3/4" is a spare...

H00141 - Bar Knob 1/4"-20

H00141 Bar Knob 1/4"-20 Specifically engineered for use with the Castle TSM-21 line of Pocket Hole Machines the H00141 Bar Knob 1/4"-20 is a spare part you need to have. Engineered to hold up to...

E75762 - 30 Amp Power Switch

Specifically engineered for use with the Castle TSM-12, TSM-21, and TSM-22 line of Pocket Hole Machines, the E75762 30 Amp Power Switch is a spare part you need to have. Engineered to hold up to...

E11424 - 24 VAC Multi Tap Transformer