Quick view Castle B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank MSRP: Now: $17.99 Add to Cart Quick view Castle B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart Quick view Castle TSM-22 Pocket Cutter Machine MSRP: Now: $5,299.00 Add to Cart Quick view Castle B01964 - 9/64” Drill Bit Split Point With 1/4” Shank MSRP: Now: $10.99 Add to Cart Quick view Castle CSI 1.5D Pocket Cutter/Screw Inserter Machine MSRP: Now: $59,999.00 Add to Cart Quick view Castle SideShift Double Pocket Auto Positioner Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart Quick view Castle TSM-22 Pocket Cutter Machine MSRP: Now: $5,299.00 Add to Cart Quick view Castle B01964 - 9/64” Drill Bit Split Point With 1/4” Shank MSRP: Now: $10.99 Add to Cart Quick view Castle CSI 1.5D Pocket Cutter/Screw Inserter Machine MSRP: Now: $59,999.00 Add to Cart Quick view Castle SideShift Double Pocket Auto Positioner Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle TSM-22 Pocket Cutter Machine MSRP: Now: $5,299.00 Add to Cart Quick view Castle B01964 - 9/64” Drill Bit Split Point With 1/4” Shank MSRP: Now: $10.99 Add to Cart Quick view Castle CSI 1.5D Pocket Cutter/Screw Inserter Machine MSRP: Now: $59,999.00 Add to Cart Quick view Castle SideShift Double Pocket Auto Positioner Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle B01964 - 9/64” Drill Bit Split Point With 1/4” Shank MSRP: Now: $10.99 Add to Cart Quick view Castle CSI 1.5D Pocket Cutter/Screw Inserter Machine MSRP: Now: $59,999.00 Add to Cart Quick view Castle SideShift Double Pocket Auto Positioner Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle CSI 1.5D Pocket Cutter/Screw Inserter Machine MSRP: Now: $59,999.00 Add to Cart Quick view Castle SideShift Double Pocket Auto Positioner Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle 15 Minutes of Phone Support for Machines over 5 Years Old MSRP: Now: $29.99 Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle MSRP: Now: $1,075.99 Add to Cart SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view Castle 3/8 4 Flute Cobalt Rough Mill - 5 Pack MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle AT-Race 4' x 12' Face Frame Assembly Table MSRP: Now: $10,999.00 Add to Cart Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle AT-Race 4' x 8' Face Frame Assembly Table MSRP: Now: $7,499.00 Add to Cart Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank MSRP: Now: $17.99 Add to Cart SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view Castle B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view Castle B00316 - 3/16” Drill Bit Split Point With 1/4" Shank MSRP: Now: $10.99 Add to Cart SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view Castle B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the... MSRP: Now: $17.99 Add to Cart Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank The Premium version of this bit is in stock and can be found here: B02964 - 9/64" Premium Drill Bit Brad & Spur This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip... MSRP: Now: $10.99 Add to Cart Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view TSM-22 Pocket Cutter Machine The TSM-22 clamps the stock, routs a 6 degree, low-angle pocket, and drills a pilot hole - all with a tap of the foot pedal - in a cycle time of just 1.5 to 2 seconds. Known for creating... MSRP: Now: $5,299.00 Add to Cart Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view B01964 - 9/64” Drill Bit Split Point With 1/4” Shank The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit... MSRP: Now: $10.99 Add to Cart Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view CSI 1.5D Pocket Cutter/Screw Inserter Machine The CSI-1.5D Pocket Cutter/Screw Inserter Machine cuts Castle’s 6 degree low-angle pocket, drills a pilot hole, and inserts a screw - all in 1.5 seconds. The CSI-1.5D produces stackable parts... MSRP: Now: $59,999.00 Add to Cart Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,... Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view SideShift Double Pocket Auto Positioner Introducing SideShift, a double pocket auto positioner now available for the CSI 1.5D Pocket Cutter/Screw Inserter Machine. SideShift automatically positions the stock and creates two low angle,...
Quick view 15 Minutes of Phone Support for Machines over 5 Years Old Technical phone support for machines OVER 5 years old [excluding CSI] , $29.99 per 15 minute session. Time can only be used for this session. Any unused time expires and can not be... MSRP: Now: $29.99 Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view 220 volt Euro version, Castle 110 Pocket Cutter Professional Bundle Note: This is the 220 volt version that comes with a European Schuko electric plug. Create Castle low-angle, professional pockets wherever your work is: the highly portable Castle 110 is perfect for... MSRP: Now: $1,075.99 Add to Cart SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view 3/8 4 Flute Cobalt Rough Mill - 5 Pack Save 10% by purchasing in packs of 5 5-pack. The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will... MSRP: $274.95 Was: $274.95 Now: $247.46 Add to Cart Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view AT-Race 4' x 12' Face Frame Assembly Table Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. Take assembly to a whole new level: decrease the time needed for assembly and... MSRP: Now: $10,999.00 Add to Cart Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view AT-Race 4' x 8' Face Frame Assembly Table Take assembly to a whole new level with our AT-Race Tables: decrease the time needed for assembly and increase the quality of the work done. Our Assembly Tables have an open-back design with clamping... MSRP: Now: $7,499.00 Add to Cart Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split... MSRP: Now: $17.99 Add to Cart SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view B00118-010 1/8" Castle Bit with 1/4" Shank - 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit... MSRP: $179.90 Was: $179.90 Now: $161.91 Add to Cart Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
Quick view B00316 - 3/16” Drill Bit Split Point With 1/4" Shank The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will... MSRP: Now: $10.99 Add to Cart SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected ×
SALE Quick view B00316-010 3/16 Castle Drill Bit w/ 1/4` Shank, 10 Pack Save 10% by purchasing in packs of 10 10-pack The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as... MSRP: $109.90 Was: $109.90 Now: $98.91 Add to Cart 1 2 3 4 5 6 Compare Selected
