H00352 - 003 Buna-N O-Ring

G11242 - AT Wear Strip

C08400 - AT Cylinder Piston

C08345 - AT Arm Spacer Assembly

C08161 - AT Arm Bearing Assembly

C08002 - AT Clamp Cylinder Assembly

C08000 - AT Gun Hose Assembly

C00848 - AT-8 Work Top Assembly

This product will be shipped via LTL truck.

N08440 - Extruded Aluminum Manifold AT Arm

N08096 - AT-96 Clamp Foot

N08011 - AT Air Cylinder Ring

N08010 - AT Air Cylinder Piston

N08006 - AT Cylinder Sleeve

N08005 - AT Cylinder Foot

N08001 - AT Valve Piston Delrin

P53000 - Monnier Regulator 101-3000-2

 

P32012 - Clamp Pilot Valve

Pilot valve, used in conjuction with the Clamp solenoid to control the Clamp cylinder. Clippard, Model 2012, 3 way valve.

P20202 - Brass Miniature Fitting 10-32 Female Hex Coupling

P13013 - Solenoid Manifold w/ Coils

P10001 - SQE Humphrey Valve

P00215 - TSM Clamp Cylinder

Used on TSM-20, TSM-21 and TSM-35 Note: Clamp Foot sold separately

N20001 - TSM-20 Single Coil Bar Spring

E60286 - Snap Action, Pushbutton Microswitch

Used in three postions on the TSM-20 as the Wood sensor switch, Router stop switch and Drill Stop switch.

E60284 - Snap Action, Lever Micro Switch

E20126 - Fabco 120V Solenoid Coil

D00402 - Black Plastic Door Hinge, Female half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

D00401 - Black Plastic Door Hinge, Male half

This door hinge is for TSM-20 and older TSM-21 and TSM-35 Models.

B03055 - Solid Carbide Line Boring Bit

B03055 - Solid Carbide Line Boring Bit     BULK DEAL:   Buy 5 - 22 and get $1.95 off Buy 23 - 29 and get $3.00 off Buy 30 or more and get $3.95 off  

B00764 - 7/64” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for screw insertion—it can also be used with smaller screws. The 7/64” split point will work...

B00316 - 3/16” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will provide a slip fit for easy screw insertion. When you are...

B00338 - 3/8” Solid Carbide 3-Flute Router Bit

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all materials, including composites and dense hardwoods such as hickory. The three-flute bit can be resharpened,...

TSM-12 Benchtop Pocket Cutter Machine

The TSM-12 benchtop pocket cutter machine is designed very similarly to Castle’s original pocket cutter. These machines have an amazingly long service life, and on the rare occasion when one becomes available in the used tool market, it tends to...

B00438 - 3/8" Cobalt Steel 4-Flute Roughing Router Bit

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will want to use our Solid Carbide bit - B00338.) The rough mill design routs a consistently clean and splinter...

B01338 - 3/8" Solid Carbide 3-Flute Reverse Helix Router Bit

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. The groove pattern of the cutting teeth on this bit create a downward cutting motion for better finishes...