B02964 - 9/64" Premium Drill Bit Brad & Spur Point with 1/4" Shank

Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitride (TiN) coated, adding considerably to the lifespan of the bit. TiN coating is harder than carbide...

B00964 - 9/64" Drill Bit Brad And Spur Point With 1/4" Shank

This is the most popular Castle Woodworking Drill Bit.  The Brad And Spur tip tracks well in all types of materials and is recommended for use with a No.7 screw. This bit is ideal for hard woods including the more dense species. When you are in...

B01964 - 9/64” Drill Bit Split Point With 1/4” Shank

The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain pattern like plywood. A No.7 screw used with this bit will provide a slip fit for easy screw insertion. When...

B00338 - 3/8” Solid Carbide 3-Flute Router Bit

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all materials, including composites and dense hardwoods such as hickory. The three-flute bit can be resharpened,...

B00438 - 3/8" Cobalt Steel 4-Flute Roughing Router Bit

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will want to use our Solid Carbide bit - B00338.) The rough mill design routs a consistently clean and splinter...

B00764 - 7/64” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for screw insertion—it can also be used with smaller screws. The 7/64” split point will work...

B00316 - 3/16” Drill Bit Split Point With 1/4" Shank

The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used with a No.8 screw, the 3/16” hole will provide a slip fit for easy screw insertion. When you are...

B01338 - 3/8" Solid Carbide 3-Flute Reverse Helix Router Bit

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. The groove pattern of the cutting teeth on this bit create a downward cutting motion for better finishes...

B00622 - #2 Robertson Square Driver Bit, 6" Shank

BULK DEAL:   Buy 5 - 9 and get $0.35 off Buy 10 or more and get $0.50 off  

B00118 - 1/8” Premium Drill Bit Split Point With 1/4" Shank

The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for a slip fit. Our 1/8” Split Point Drill Bit will work well in all materials...

B00532 - 5/32” Premium Drill Bit Split Point With 1/4” Shank

The Castle woodworking 5/32” Drill Bit is the perfect fit when you would like a larger hole than our 9/64” bit can provide. This bit works well on all materials and is more than suitable for the majority of your pocket cutting needs. When you...

B03964 - 9/64" Premium Drill Split Point with 1/4" Shank

B03964 - 9/64" Premium Split Point Woodworking Drill Bit Manufactured using the same specifications as our standard 9/64" Split Point drill bit, this premium version is titanium nitride (TiN) coated, adding considerably to the lifespan of the bit...

B02622 - #2 Square Driver Bit, Round

NOT COMPATIBLE WITH CASTLE 110.   Specifically engineered for use with the Castle 100 Pocket Hole Machine the #2 Square Driver Bit is mounted to a drill for final assembly of the previously drilled pocket hole. Engineered to hold up to heavy duty...

B00620 - 6" #20 Torx Driver Bit, Round

Specifically engineered for use with the Castle 100 Pocket Hole Machine. Engineered to hold up to heavy duty use of an industrial environment. Keep one on hand for a quick change in order to keep production steady. The round design makes driving the...

Castle 100/110 Drill bit

Castle 100 5/32" Drill Bit, 4.5" length.     This bit is intended to drill the pilot hole when mounted on the Castle 100 or Castle 110 Portable Pocket Cutter.     *Not compatible with the TSM Models.  

Castle 110 8mm Rougher Bit

An 8mm Roughing Cutter Router Bit the has been exclusively designed for use in the Castle 110 when cutting pockets in dense hard wood stock.

B00516 - Castle 100 Router Bit

  5/16 Router Bit for the Castle 100.  The 5/16 Router Bit is to be used exclusively with the Castle 100 Portable Pocket Cutter.    *Will not work with the TSM models or any other applications.

B00320 - T20 Torx Driver, 3-1/2" Length

3-1/2" length driver for Torx screws

Castle Tight Access Driver

Castles Tight Access Driver lets you tighten your pockets and access hard to reach screws in narrow fit applications.  Engineered to hold up to heavy duty demands of an industrial environment. Keep one on hand for a quick change in order to keep...

N00538 - 1/2" to 3/8" Collet Reducer

This collet reducer bushing is used in a 1/2" collet to allow it to accept 3/8" bits. It can be used in all 1/2" router collets. Contact us for application information and installation tips. When you are in need of premier woodworking tools and supplies,...

Castle 110 8mm Standard Smooth Router Bit

This is the standard smooth router bit included with the Castle 110. For the roughing bit designed for denser hardwood stock, please see B02517.

Castle Third Hand Tool

The Castle Third Hand Tool gives you that “3rd hand” while assembling your project with Castle Pockets. The Third Hand Tools work in the 90-degree position and in the flat position. No need for 2 different styles of clamps! Simply place the...